CDG223NGB – EATON 2P100A 250V FUSED DISCONECT

The Eaton CDG Series fused disconnect is typically configured for Class J or Class R fuses up to 100A at 250V. The exact fuse class accepted depends on the specific fuseholder inserts installed. We recommend confirming the fuse class with us before purchasing replacement fuses to ensure the correct type and interrupting rating for your application.

Yes — a properly rated fused disconnect switch like the ETNCDG223NGB can serve as a disconnecting means under the CEC, provided it meets the voltage, amperage, and short-circuit current rating (SCCR) requirements for the installation. Always verify with your local inspector or authority having jurisdiction (AHJ) to confirm it satisfies all applicable code requirements for your specific installation.

Yes. The 2-pole, 100A, 250V rating makes this Eaton CDG fused disconnect well suited for isolating single-phase or DC motors and associated equipment. When used as a motor disconnect, ensure the fuse sizing complies with CEC motor circuit protection rules (typically 150–175% of motor full-load current for time-delay fuses). Contact us if you need help selecting the correct fuse rating for your motor.