QC3070H – EATON 3P70A 240V LUG IN LUG OUT BREAKER

A standard breaker connects the load wire only at the breaker's output lug, while a lug-in, lug-out breaker like the QC3070H has lugs on both the line (input) and load (output) sides. This makes it ideal for sub-feed or feeder applications where the breaker is used to pass power through directly to a downstream panel or equipment, rather than tapping off a bus bar in the conventional way.

The QC frame series is an Eaton product line designed for use in Eaton CH (Type-CH) panelboards that accept bolt-on breakers. However, compatibility depends on the specific panelboard model, bus rating, and available space. We recommend confirming your panel model with us before ordering — contact our Calgary, Edmonton, or Vancouver counter and we'll verify the fit.

Yes. The QC3070H is a 3-pole breaker rated for 240 V, making it suitable for 3-phase loads in light commercial and residential sub-feed applications. Its 10 kA interrupting rating is appropriate for many distribution scenarios, but you should verify that the available fault current at the installation point does not exceed this rating. If you need a higher interrupting capacity, contact us and we can source an appropriate alternative.